Product List
- Plate heat exchanger
- All-welded heat exchanger block
- All-welded plate-frame heat exchanger
- All-welded heat exchanger kozhuhoplastinchaty
- All-welded spiral heat exchanger
- Gasketed plate heat exchanger
- Plate heat exchanger for marine industry
- Plate heat exchanger for the dairy industry
- Block heater
- brazed heat exchanger
- Plate evaporator and plate condenser
Gasketed plate heat exchanger
-
- Plate heat exchanger for marine industry
We are a professional manufacturer of plate heat exchangers for the shipbuilding industry in China....
-
- Plate heat exchanger for the dairy industry
gh the equalizing tank 1 and a pump 2 for the material, which is preheated....
Gasketed plate heat exchanger
description
Gasketed plate heat exchangers consist of a series of ribbed plates. The plates are stacked on a frame which consists of fixed and movable pressure plates and the upper rail and the lower support struts. Tightening the stud plate placed between the plates in the package. Working medium enters the plate pack via connections (fittings) on the fixed and movable clamping plates. Location of plates creates two separate channels, allowing two working fluid streams to flow together and intersect without physical contact, and out of the equipment from the pipes on the pressure plate. In one plate package of the plate may be used with different surface patterns to maximize the efficiency of the given parameters. Collapsible multi-pass heat exchanger arrangement of plates can have more than two working environments.
Series AU, AC, AS, AP
Connection size: DN32 - DN500
Max. flow: 4500m3 / h
Max. capacity: 60MW
The temperature difference between incoming and outgoing flows: less than 1 ℃
(Heat recovery)
Thickness: 0.4, 0.5, 0.6, 0.7mm
Max. design pressure: 26 bar
Max. design temperature: ≤180 ℃
Gasket Material: NBR, HNBR, EPDM, HEPDM, VITON
Plate material: AISI304, 316, 316L, titanium, nickel alloy, SMO254
Gasketed plate heat exchangers consist of a series of ribbed plates. The plates are stacked on a frame which consists of fixed and movable pressure plates and the upper rail and the lower support struts. Tightening the stud plate placed between the plates in the package. Working medium enters the plate pack via connections (fittings) on the fixed and movable clamping plates. Location of plates creates two separate channels, allowing two working fluid streams to flow together and intersect without physical contact, and out of the equipment from the pipes on the pressure plate. In one plate package of the plate may be used with different surface patterns to maximize the efficiency of the given parameters. Collapsible multi-pass heat exchanger arrangement of plates can have more than two working environments.
The application range of gasketed plate heat exchangers
Series AU, AC, AS, AP
Connection size: DN32 - DN500
Max. flow: 4500m3 / h
Max. capacity: 60MW
The temperature difference between incoming and outgoing flows: less than 1 ℃
(Heat recovery)
Thickness: 0.4, 0.5, 0.6, 0.7mm
Max. design pressure: 26 bar
Max. design temperature: ≤180 ℃
Gasket Material: NBR, HNBR, EPDM, HEPDM, VITON
Plate material: AISI304, 316, 316L, titanium, nickel alloy, SMO254
Specifications gasketed heat exchangers
| Model plate | Plate width (mm) | The height of the plates (mm) | The surface of each heat transfer plate (m2) | Max. heat transfer surface area (m2) | Max. throughput (m3 / h) | Max. test pressure (MPa) | Depth of corrugations in plates (mm) | Connection dimensions (mm) | |
| AU3 | 165 | 464 | 0.039 | 5 | 14.50 | 2.00 | 2.600 | 32 | DN32 |
| AU5 | 260 | 695 | 0.11 | 15 | 35.30 | 2.00 | 3.00 | 50 | DN50 |
| AU8 | 349 | 832 | 0.16 | 50 | 90.00 | 3.13 | 3.20 | 80 | DN80 |
| AU10L1 | 405 | 896 | 0.24 | 70 | 141.00 | 3.13 | 3.60 | 100 | DN100 |
| AU10L2 | 405 | 1218 | 0.39 | 110 | 141.00 | 3.13 | 3.60 | 100 | DN100 |
| AU15M | 524 | 1400 | 0.50 | 170 | 318.00 | 3.13 | 3.80 | 150 | DN150 |
| AU15L1 | 500 | 1314 | 0.43 | 170 | 318.00 | 3.13 | 3.80 | 150 | DN150 |
| AU15L2 | 500 | 1666 | 0.65 | 350 | 318.00 | 3.13 | 3.80 | 150 | DN150 |
| AU20 | 695 | 1760 | 0.95 | 400 | 565.00 | 3.13 | 3.80 | 200 | DN200 |
| AN5 | 260 | 695 | 0.13 | 20 | 35.30 | 2.00 | 2.00 | 50 | DN50 |
| AN10 | 405 | 1218 | 0.38 | 150 | 141.00 | 3.13 | 2.60 | 100 | DN100 |
| AN15L1 | 500 | 1244 | 0.43 | 200 | 318.00 | 3.13 | 2.60 | 150 | DN150 |
| AC65 | 375 | 1500 | 0.55 | 300 | 318.00 | 3.13 | 2.60 | 100 | DN150 |
| AN15L2 | 500 | 1666 | 0.65 | 400 | 318.00 | 3.13 | 2.60 | 150 | DN150 |
| AN20 | 610 | 1800 | 0.98 | 600 | 2.00 | 200 | DN200 | ||
| AN25L1 | 740 | 1980 | 1.13 | 700 | 883.00 | 3.13 | 2.60 | 250 | DN250 |
| AN25L2 | 740 | 2262 | 1.35 | 1000 | 883.00 | 3.13 | 2.60 | 250 | DN250 |
| AN30L1 | 870 | 1524 | 0.71 | 3.20 | 300 | DN300 | |||
| AN30L2 | 870 | 2010 | 1.17 | 3.20 | 300 | DN300 | |||
| AN30L3 | 870 | 2496 | 1.63 | 3.20 | 300 | DN300 | |||
| AN30L4 | 870 | 2982 | 2.09 | 1300 | 1017.00 | 2.00 | 3.20 | 300 | DN300 |
| AN35L1 | 995 | 1530 | 0.71 | 3.80 | 350 | DN350 | |||
| AN35L2 | 995 | 1874 | 1.09 | 3.80 | 350 | DN350 | |||
| AN35L3 | 995 | 2218 | 1.47 | 3.80 | 350 | DN350 | |||
| AN35L4 | 995 | 2562 | 1.85 | 1700 | 1730.00 | 2.00 | 3.80 | 350 | DN350 |
| AN40L1 | 1219 | 1755 | 1.12 | 3.80 | 400 | DN400 | |||
| AN40L2 | 1219 | 2215 | 1.75 | 3.80 | 400 | DN400 | |||
| AN40L3 | 1219 | 2675 | 2.38 | 3.80 | 400 | DN400 | |||
| AN40L4 | 1219 | 3135 | 3.01 | 2200 | 2261.00 | 2.00 | 3.80 | 400 | DN400 |
| AN45L1 | 1219 | 1865 | 1.09 | 3.80 | 450 | DN450 | |||
| AN45L2 | 1219 | 2325 | 1.72 | 3.80 | 450 | DN450 | |||
| AN45L3 | 1219 | 2785 | 2.35 | 3.80 | 450 | DN450 | |||
| AN45L4 | 1219 | 3245 | 2.98 | 2800 | 2861.00 | 2.00 | 3.80 | 450 | DN450 |
| AN50L4 | 1550 | 3991 | 3.15 | 3500 | 3532.00 | 2.00 | 3.80 | 500 | DN500 |
| AS6 | 335 | 513 | 0.08 | 10 | 60.00 | 2.00 | 4.00 | 65 | DN65 |
| AS20 | 610 | 960 | 0.28 | 80 | 565.00 | 2.00 | 3.80 | 200 | DN200 |
| AS25 | 750 | 1146 | 0.45 | 120 | 883.00 | 2.00 | 3.80 | 250 | DN250 |
External circuit gasketed plate heat exchangers
Key Features collapsible heat exchangers
| Model plate | Plate width (mm) | The height of the plates (mm) | The surface of each heat transfer plate (m2) | Max. heat transfer surface area (m2) | Max. throughput (m3 / h) | Max. test pressure (MPa) | Depth of corrugations in plates (mm) | Connection dimensions (mm) | |
| AU3 | 165 | 464 | 0.039 | 5 | 14.50 | 2.00 | 2.600 | 32 | DN32 |
| AU5 | 260 | 695 | 0.11 | 15 | 35.30 | 2.00 | 3.00 | 50 | DN50 |
| AU8 | 349 | 832 | 0.16 | 50 | 90.00 | 3.13 | 3.20 | 80 | DN80 |
| AU10L1 | 405 | 896 | 0.24 | 70 | 141.00 | 3.13 | 3.60 | 100 | DN100 |
| AU10L2 | 405 | 1218 | 0.39 | 110 | 141.00 | 3.13 | 3.60 | 100 | DN100 |
| AU15M | 524 | 1400 | 0.50 | 170 | 318.00 | 3.13 | 3.80 | 150 | DN150 |
| AU15L1 | 500 | 1314 | 0.43 | 170 | 318.00 | 3.13 | 3.80 | 150 | DN150 |
| AU15L2 | 500 | 1666 | 0.65 | 350 | 318.00 | 3.13 | 3.80 | 150 | DN150 |
| AU20 | 695 | 1760 | 0.95 | 400 | 565.00 | 3.13 | 3.80 | 200 | DN200 |
| AN5 | 260 | 695 | 0.13 | 20 | 35.30 | 2.00 | 2.00 | 50 | DN50 |
| AN10 | 405 | 1218 | 0.38 | 150 | 141.00 | 3.13 | 2.60 | 100 | DN100 |
| AN15L1 | 500 | 1244 | 0.43 | 200 | 318.00 | 3.13 | 2.60 | 150 | DN150 |
| AC65 | 375 | 1500 | 0.55 | 300 | 318.00 | 3.13 | 2.60 | 100 | DN150 |
| AN15L2 | 500 | 1666 | 0.65 | 400 | 318.00 | 3.13 | 2.60 | 150 | DN150 |
| AN20 | 610 | 1800 | 0.98 | 600 | 2.00 | 200 | DN200 | ||
| AN25L1 | 740 | 1980 | 1.13 | 700 | 883.00 | 3.13 | 2.60 | 250 | DN250 |
| AN25L2 | 740 | 2262 | 1.35 | 1000 | 883.00 | 3.13 | 2.60 | 250 | DN250 |
| AN30L1 | 870 | 1524 | 0.71 | 3.20 | 300 | DN300 | |||
| AN30L2 | 870 | 2010 | 1.17 | 3.20 | 300 | DN300 | |||
| AN30L3 | 870 | 2496 | 1.63 | 3.20 | 300 | DN300 | |||
| AN30L4 | 870 | 2982 | 2.09 | 1300 | 1017.00 | 2.00 | 3.20 | 300 | DN300 |
| AN35L1 | 995 | 1530 | 0.71 | 3.80 | 350 | DN350 | |||
| AN35L2 | 995 | 1874 | 1.09 | 3.80 | 350 | DN350 | |||
| AN35L3 | 995 | 2218 | 1.47 | 3.80 | 350 | DN350 | |||
| AN35L4 | 995 | 2562 | 1.85 | 1700 | 1730.00 | 2.00 | 3.80 | 350 | DN350 |
| AN40L1 | 1219 | 1755 | 1.12 | 3.80 | 400 | DN400 | |||
| AN40L2 | 1219 | 2215 | 1.75 | 3.80 | 400 | DN400 | |||
| AN40L3 | 1219 | 2675 | 2.38 | 3.80 | 400 | DN400 | |||
| AN40L4 | 1219 | 3135 | 3.01 | 2200 | 2261.00 | 2.00 | 3.80 | 400 | DN400 |
| AN45L1 | 1219 | 1865 | 1.09 | 3.80 | 450 | DN450 | |||
| AN45L2 | 1219 | 2325 | 1.72 | 3.80 | 450 | DN450 | |||
| AN45L3 | 1219 | 2785 | 2.35 | 3.80 | 450 | DN450 | |||
| AN45L4 | 1219 | 3245 | 2.98 | 2800 | 2861.00 | 2.00 | 3.80 | 450 | DN450 |
| AN50L4 | 1550 | 3991 | 3.15 | 3500 | 3532.00 | 2.00 | 3.80 | 500 | DN500 |
| AS6 | 335 | 513 | 0.08 | 10 | 60.00 | 2.00 | 4.00 | 65 | DN65 |
| AS20 | 610 | 960 | 0.28 | 80 | 565.00 | 2.00 | 3.80 | 200 | DN200 |
| AS25 | 750 | 1146 | 0.45 | 120 | 883.00 | 2.00 | 3.80 | 250 | DN250 |
